E2U Epoxy Products
OC Specialty Coatings is E2U’s largest distributor in California. We carry their full line of Garage Epoxies, Metalic Epoxy Systems. We can mix all their colors in-house with our digital mixing stations. Our highly trained sales staff at OC Specialty Coatings can guide you every step of the way on building your Epoxy Coating business or upcoming project.
E2U Acrylic Sealer
E2U Acrylic Sealer is formulated with aliphatic polymers using fast-drying solvents. It provides excellent adhesion to a variety of concrete and paver surfaces.E2U Acrylic Sealer is low VOC, and resistant to water, stains, chemicals, salt damage oil, and grease.
E2U Crazy Bond Primer
E2U Crazy Bond Primer is a revolutionary Primer and complete floor prep system in one. It bonds to virtually any surface including; epoxy, paint, asphalt, linoleum wood, metal, VCT, sealed concrete, ceramic tile, masonry, and bituminous roofing.
E2U Chemical Resistant Urethane
E2U Chemical Resistant Urethane (CRU) is designed for speedy turnaround. CRU has a pot life of up to 90 minutes in real-world conditions yet it dries in 30 minutes or less after it is applied to concrete. CRU will provide an extremely high gross look due to its ability to dive deep into the concrete surface. Epoxy2U CRU has excellent chemical resistance, abrasion resistance, and UV stability with low viscosity.
E2U Epoxy 4500
E2U Epoxy 4500 is a 2-component, 100% solids, low-VOC, UV resistant, abrasion and chemical resistant. It has a long working time and excellent flowability. E2U Epoxy 4500 provides a high gloss finish with color stability. It is ideal for commercial kitchens, schools, and hospitals where low odor is required. Epoxy 4500 is available in clear and pigmented. It can be applied to Flake and Quartz systems as well.
E2U 100% Solids Epoxy
E2U 100% Solids Epoxy is a two-component, high-performance, modified cyclo aliphatic epoxy concrete floor coating system. E2U 100% Epoxy has features for high gloss, low odor, solvent-free, abrasion, and chemical resistance. It has excellent characteristics and it can be applied 8 to 50 mil coating system. E2U 100% Solids Epoxy design features provide for the highest industrial and commercial demands. It can also be used to mix with silica sand to make an epoxy mortar to restore damaged concrete or to use the epoxy mortar as a floor surfacing overlay to protect the concrete from impact and wear and resist chemical attack if properly sealed with the same product.
E2U Epoxy 6150
E2U Epoxy 6150 is a VOC-compliant, high solids, 2-component, and designed as a base coat for color flake (chip) flooring. This application can be applied to new and existing concrete. E2U’s Epoxy 6150 formula allows a typical floor to be installed within one day and provides excellent adhesion and hide to concrete in a single coat application. Epoxy 6150 withstands up to 9 lbs of moisture vapor emissions.
E2U Epoxy Accelerator
E2U Epoxy Accelerator is the special additive for use with epoxies (100% Solids Epoxy, Epoxy6150 & Moisture Vapor Barrier Epoxy) to accelerate the cure rate and allow for coating application at temperatures down to 35°F (2°C). E2U Epoxy Accelerator is an additive to be used for both pigmented and clear epoxies. NOTE: E2U Epoxy Accelerator greatly increases the cure rate of these systems, reducing both pot life and dry time.
E2U Countertop Epoxy
E2U Countertop Epoxy is self-leveling, has zero VOC, and is essentially odorless. Typically applied at a 22-25 mil think single coat (50 SF/gal). This dynamic blend does not require an activator to be sprayed on the surface to obtain a unique and highly decorative look. It meets USDA requirements for incidental food contact. This material cures blush-free and provides an outstanding balance of physical strength and flexibility.
E2U Metallic Epoxy LV
E2U Metallic Epoxy LV has 45-60 minutes working time, and it has excellent flow-ability and self-leveling properties. Its epoxy chemistry provides excellent bonding characteristics and is typically applied at 20 mils thick single coat (50-60 sq. ft./gal). This dynamic blend does not require an activator to be sprayed on the surface to obtain a unique and highly decorative look. When mixed with E2U Metallic Pigments, you have 28 different colors to choose from.
E2U MVB15
E2U MVB15 is a VOC-compliant, two-component, 100% solids epoxy system for concrete substrates. MVB15 is a moisture vapor barrier that reduces the permeance of moisture vapor to levels that are acceptable for the application of flooring installation systems and floor coverings. It is compatible with most flooring adhesives and cementitious underlayments, including all E2U adhesives, primers, and underlayments.
E2U Polyaspartic ULTRA
E2U Polyaspartic ULTRA has essentially zero odor. The ideal applications are hospitals, restaurants, kennels, veterinary facilities, healthcare facilities, garages, etc. It is a two-component, extremely chemical resistant. and non-yellowing aliphatic polyaspartic. It features high gloss, high build, and a cure time of 4 to 6 hours, and generally returns to service in 24 hours. It can be installed in extremely high or low temperatures. E2U Polyaspartic ULTRA is the ideal product when extremely low odor, durability, and UV stable system are required.
E2U Polyaspartic-RC
E2U Polyaspartic-RC is the next generation of 2-component, fast-drying, high-solids, aliphatic Polyaspartic. It has excellent resistance to a broad range of chemicals such as inorganic acids, alkalis, amines, salts, and solvents. E2U Polyaspartic-RC’s formula provides on-yellowing and long-term gloss retention for interior/exterior applications. It is the essential product when a project needs a fast turnaround, high UV resistance, low VOC, and a flexible system. The cure time is 2 to 3 hours.
E2U Polyaspartic Slow Cure
E2U Polyaspartic Slow Cure is a two-component, extremely chemical resistant. and non-yellowing aliphatic polyaspartic. It features high gloss, high build, and a cure time of 48 hours, and generally returns to service in 72 hours. It can be installed in extremely high or low temperatures. E2U Polyaspartic Slow Cure is the ideal product for use on large-scale projects or where an excessive amount of “cut-in” is required.
E2U Skydrol Polyaspartic
E2U Skydrol Polyaspartic is the next generation in two components, AliphaticPolyaspartic. It has excellent penetration and bond strength to the surface. It features excellent abrasion, impact, and wear resistance. It is highly chemically resistant to hydraulic fluids. It has a cure time of four to six hours. It can be installed in extremely high or low temperatures. It is the ideal product when low odor, fast turnaround, and a non-yellowing system are essential.
E2U Urethane 321-200
E2U Urethane 321-200 is a three-component aliphatic urethane floor finish. It is extremely abrasive and scratch-resistant. It is chemical resistant & UV stable. It is easy to apply and has a large coverage rate. The combination of A, B, and C components will result in a satin (semi-gloss) finish. It must be applied at 2 -3 mil thickness (500 -550 sqft per 1gal kit).
E2U Waterbased urethane (WBU)
E2U Waterbased Urethane (WBU) is a premium 2-component waterbased urethane that provides equal superior performance to Polyaspartic without any odor, health, or environmental issues. E2U Waterbased urethane is VOC-compliant and is available in matte or gloss. It gives hard, durable coatings that feature good gloss, superior abrasion resistance, and UV resistance. E2U WBU has been formulated to offer a high-performance finish coat for seamless flooring, coating, and architectural concrete applications where odor and health concerns are sensitive.
E2U Waterbased Epoxy
E2U Waterbased Epoxy is a premium quality 2-component water-base epoxy concrete sealer/primer that provides epoxy toughness, chemical resistance, and durability with the convenience of a water-based VOC-free system. It is fast cure and easy to use. Zero VOC, clean up with water & soap. It provides excellent substrate penetration and it is a suitable primer for most epoxies, urethanes, and polyaspartic.
E2U Epoxy 6150 SLOW
E2U Epoxy 6150 SLOW is VOC-compliant, high solids, 2-component, and designed as a base coat for color flake (chip) flooring. This application can be applied to new and existing concrete. Our Epoxy 6150 SLOW formula allows a typical floor to be installed within one day and provides excellent adhesion and hide to concrete in a single coat application. Epoxy 6150 withstands up to 9 lbs of moisture vapor emissions. Epoxy 6150 SLOW adheres to damp or dry concrete and gives ample open time for broadcasting the color flakes (chips).
E2U Polymer Concrete Urethane Cement
E2U Polymer Concrete Urethane Cement is a flowable polyurethane concrete installed at ⅛” to ¼” to protect concrete from physical and chemical damage. It is highly impact and abrasion-resistant. It is unaffected by animal fats and most solvents. E2U PolymerConcrete has a thermal expansion and contraction similar to concrete which allows it to maintain adhesion when subjected to the hot pressure washed. It can be used at constant service temperatures up to 220°F. E2U Polymer Concrete is a fast cure and is usually installed without a primer or top coat and can be returned to service 12-24 hours after installation.
E2U Rapid Mender Concrete Repair
E2U Rapid Mender Concrete Repair is a specially formulated rapid-setting polymer repair product. In its ultra-low viscosity form, Rapid Mender will penetrate deep into concrete substrates. Add the optional Multi-Use Dry Blend and Rapid Mender will act as a rapid setting repair mortar.
E2U Clear Art Epoxy (Deep Pour)
E2U Clear Art Epoxy (Deep Pour) is a two-component, high-performance, modified cycloaliphatic epoxy decorative coating system. Clear Art Epoxy features high-gloss, low odor, solvent-free, extremely durable, and UV resistance. It offers an ultra-clear finish and can be applied up to 1′′ thick. E2U Clear Art Epoxy is ideal for river tables, countertops, live edge tables, bar tops & and more.
E2U Waterbased Acrylic Sealer
E2U Waterbased Acrylic Sealer dries to a clear, abrasion-resistant film which provides a weatherproof, sealer that is resistant to sun, moisture, industrial chemicals, oil, grease, and most caustic cleaning agents. E2U Water-based Acrylic Sealer will extend the surface life to organic surfaces. When properly applied, its exceptional penetrating properties will seal concrete and other surfaces keeping them easy to clean and maintain. Regular cleanup and maintenance procedures can be easily implemented. E2UWater-based Acrylic Sealer will not be yellow and will give a wet look to the concrete.